- -
CUstom Headers/Exhaust
(
http://www.clubcobra.com/forums/all-cobra-talk/119011-custom-headers-exhaust.html)
| GBowman |
02-03-2013 06:34 AM |
CUstom Headers/Exhaust
Anyone had custom Headers/side pipes made? Found two potential vendors...Stainless Header Mfg & SPD but they are both far away from the Northeast which will require a mock up without having the car. Would love to ship the car to someplace around PA/NJ/DE/NY so they can have the car on hand to fit up.
Thx
|
| Hotfingrs |
02-03-2013 07:59 AM |
If you choose an out of state vendor, you can send them the parts and they will make you a set off of them. I had mine made by a local fabrication shop.
|
| john chesnut |
02-03-2013 08:08 AM |
A little outside of your territory. But, Tubular Automotive in Mass has built a number of header and side pipes for me. I have been very happy every time. Mandrel bent, 1 piece tubes. Beautiful.
|
| GBowman |
02-03-2013 12:52 PM |
Thx Guys as always.
|
| saltshaker |
02-03-2013 01:52 PM |
Custom Headers
Stainless Headers in Fargo, ND he has a adjustable gig that he will send you and can make custom headers from that .....
Jon
|
| ERA Chas |
02-03-2013 02:23 PM |
These guys-pricey but professional. Cone collectors. I saw and heard them on an ERA FIA. Big power improvement. In central Long Island:
American Racing Headers has set the standard for high quality stainless steel exhaust systems, performance exhaust, performance headers, exhaust headers which are only made in America. 26 Elm Place, Amityville, NY 11701.
americanracingheadersny.com
|
| mickmate |
02-03-2013 04:00 PM |
Another vote for Tubular Automotive. They have done some nice hot rod exhausts for us.
|
| mdross1 |
02-04-2013 04:41 AM |
Also can't say enough about the quality of the work Tubular Automotoive does.They port matched the pipes to the head very pleased even after the nightmare of driving through the Big Dig
|
| dallas_ |
02-04-2013 05:22 AM |
Stainless Headers did mine. Very impressed with the quality and fit. The guys are easy to talk to and they will take the time to make sure you get exactly what you want. Like Saltshaker said, they have a nice jig they will send you to get the exact layout you want.
|
| GBowman |
02-04-2013 07:12 AM |
ERA Chas-thx, spoke to Mike at American Racing Headers. I will ship them the car once the engine is in. This is going to be a long winter...anticipation is killing me.
Thx again
|
| ERA Chas |
02-04-2013 08:09 AM |
Quote:
Originally Posted by GBowman
(Post 1229967)
ERA Chas-thx, spoke to Mike at American Racing Headers. I will ship them the car once the engine is in. This is going to be a long winter...anticipation is killing me.
Thx again
|
My pleasure Gary. You will be pleased and use all that Lykins power...:cool: |
| All times are GMT -7. The time now is 01:37 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
