|
fuel reg return line mod
I'm presently using a holly lo press dead head reg for my weber set-up, which works ok, but due to the fact I also have the engine driven pump plumbed in with additional hoses the system vaporlocks unless I run both pumps at all times which defeats the purpose of having the electric as a back-up & primer .
I want to run the excess fuel back to the tank to cool it. and I'm wondering if it's possible to use the unused "out" port on the reg as the return port ( with a restrictor) ? I think ELJARO uses it as a pressure bleed at shut down. any thoughts? |
| All times are GMT -7. The time now is 04:08 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: