|
Question on Fluidyne Radiator Drain Petcock thread Size?
Does anyone know the correct thread size for an aluminum Fluidyne radiator made around 2006 for CSX?
I have a 1/4-20 drain petcock and hose fitting as well but it will not thread properly. Is it possible its a metric thread 14mm 1.25 which I cannot find anywhere. Any assistnace on the threads and where to purchase is appreciated. Thanks, |
You should be good with 1/4 NPT. I find NPT (tapered) threads aren't cut very deep these days and I clean quite a few of them out with a tap so the fitting will go in.
|
| All times are GMT -7. The time now is 12:10 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: