- -
289 slab side exhaust
(
http://www.clubcobra.com/forums/all-cobra-talk/120582-289-slab-side-exhaust.html)
| B.M.B.C |
05-11-2013 03:11 PM |
289 slab side exhaust
Guys where could I buy a 289 slab undercar exhaust system and headers for a car with 3" original style chassis.
|
Good luck if you're looking for original manifolds. I'd use headers. Hillbank sells a complete system but you could also have a system made. Most competent exhaust shops could make it.
Larry
Here's the Hiillbank system:
http://ep.yimg.com/ca/I/yhst-7902252..._2262_50697022 |
| Rick 427 Cobra |
05-11-2013 05:42 PM |
David Wagner (248) 767-0548 in Michigan. The originals were small diameter tubing with glass packs.
|
| mickmate |
05-11-2013 08:12 PM |
There's 3" FIA style or Belanger dump tubes as pictured, then there's tri Y style tubular headers, then there's the original style cast branch manifolds. What do you want?
|
Nick, do you have access to original style manifolds?
Larry
|
| Steve Cassani |
05-11-2013 08:40 PM |
3 Attachment(s)
As you look over these photos, bear in mind that my slabside Kirkham uses a big block frame, narrowed three inches. The frame tubes are four inches in diameter, the size and relative location of the cross pieces differ from the original and more. These photos may serve no other purpose than to suggest a configuration.
The headers and exhaust system were constructed under contract to David Wagner.
|
Nice looking Steve! I think I prefer the side exit to running all the way back. Just looks a little cleaner IMO.
Larry
|
| mickmate |
05-12-2013 10:10 AM |
Yup......
|
| 1985 CCX |
05-12-2013 11:07 AM |
I have a set of Belanger units that Nick has access too.......
I used headers, manifolds are cool but too old school... yes I did say that....
|
| blue sky |
05-12-2013 02:58 PM |
If you want the reproductions of the original cast iron eshaust manifolds, Mike McCluskey is making them. I have several sets and they are first class work.
|
| spl310 |
06-05-2013 02:12 PM |
How much are the repro cast iron manifolds selling for? Or do I dare ask...
|
| All times are GMT -7. The time now is 05:36 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
