|
Are your spinners wired correctly?
Whenever I look around the corral at car shows I notice many Cobras with either no safety wire or wired in the wrong direction. If the owner is not around I leave a note on the seat so I thought I should repeat this article which we posted several months ago. Click on the link below from the tech info page on our web site to check it out: Safety Wiring Procedure for Spinners : Vintage Wheels, San Diegos Finest If any concerns or questions please call on 619 952 4717 Bob Lacey Vintage Wheels |
And I hate to say it, but the best spinner pliers I found were the ones at Harbor Freight. For the money, they are an awesome deal. Get the "long" one. My grandpa had a tool we used on farm equipment (in the late 50's - early 70's) and the HF tool was so much improved!!!
|
People probably got tired of onlookers telling them that their safety wire was "backwards", so they appeased the crowd!
I can't count the number of people who have questions my spinner direction safety wire done correctly. The concept of reverse thread is not a common one, that's for sure. |
It's not the wrong direction overseas...:LOL: Everything is reverse thread...
|
what would the real disadvantage to doing it the other way as long as there wire tired I thought that the reversed way allows you to see if there's some movement or that they weren't tight enough to begin with?
|
Chance are if you are using anything at .032 dia. or above, the wire is so stiff that it doesn't matter which way they are wired. I've twisted a lot of safety wire on a lot of airplanes and it's usually so stiff that you can't turn the nut even if you wire it backward.
|
Spinner Wire
Hi Bob,
Thanks for the article. Very helpful. My car came with one wire, incorrect at that. Will rewire all spinners after removing for a thorough cleaning and polishing. Invaluable info from this site, much appreciated.....Art |
Quote:
Welcome! Photos? :D Tell us more about the car if you'd like. You and I are about 25 miles apart. David |
Seems obvious to me, good to see it formalized though....
Biggest beef for me is "Does that have 427?" |
So if I understand Bob's posted instructions, the safety wire is in tension, holding the spinner tight - right?
Different from previous methods posted which had the safety wire on the other side of the spinner, which when the safety wire went "loose" it was an indication the spinner was coming loose. Just asking. Cheers Greg |
Safety Wire Direction
Quote:
|
Safety wire
I saw one Cobra wth safety wires, but there was a small loop in the middle. I asked why and was told , if the knock off moves it pulls the loop closed.
I d never seen that before. The Nut |
Quote:
|
If I'm not mistaken safety wiring originally came from aircraft, where you definately do no want to see slack or breaking. I got into it and have drilled and wired every blower, heder and engine bolt on my '38 chevy an think I will start on the Cobra next. Really looks nice with time and practice.
|
Are you building your Cobra with safety in mind ?
Great to read all of the comments - Thanks.
A loop or a bow in the spinner wire is another option - any movement will show up. but please wire in the correct direction. (link below for those who missed it the last time). Safety Wiring Procedure for Spinners : Vintage Wheels, Hot Rod and Muscle car IMO building and maintaining a Cobra or any hand built car should be compared more to owning a race car rather than a modern production car -from a safety standpoint. Use safety wire / thread locker on safety critical fasterners such as chassis / brakes / hubs / steering ,ensure all hardware is of the correct grade with sufficient thread engagement .Many cars are running huge horsepower with solid motor mounts,vibration will shake things loose! It will not cost you any more ,just a bit of extra time . After 30 odd years of Rally and Race car driving I've seen just about anything shake loose -somtimes causing retirement or worse on the last special stage of a 3 day rally! The above is obvious to most - but not all !! Bob and all at Vintage :) vintagewheelsus.com |
Quote:
|
Quote:
Cobra Valley's Safety Wire Instructions "Keep in mind that safety wire will not necessarily prevent spinners that want to loosen, from loosening, but rather consider it as a visual indicator of whether or not your spinners have moved upon periodical inspection, preferably every time before you take you car out for a drive." |
| All times are GMT -7. The time now is 10:21 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: