|
PCV valve/hose connection question
Hi all. A quick question about hooking up a PCV valve hose:
Can it be hooked up directly to a port at the back of the intake manifold plenum or does it have to be hooked up to the PCV tube connection on the base of the carb? Look forward to the help. Cheers Greg |
Either is manifold vacuum, so it doesn't matter.
|
Either or..............the port atvthe base of the carb will more evenly distribute the oil vapour across all the cylinders. At the back of the manifold the rear cylinders will be burning all the oil and make you think that you have another problem........
|
Thanks guys.
Cheers Greg |
| All times are GMT -7. The time now is 01:05 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: