|
Interested in adapter/spinner retainer clips??
We finally have our adapter/spindle spinner retainer clips .
Unlike "diaper clip" versions these will work with hub end caps in place and have a race car design. Stainless spring steel and easy to install ,link below. 1 x set adapter/spindle safety clips : Vintage Wheels, Hot Rod and Muscle car If above link does not work please go to: vintagewheelsus.com select adapters etc from the menu Bob at Vintage Wheels |
Looks good - presume these will work with others e.g. trigos?
how much is shipping to the uk for 1 set, and 5 sets? pm me if easier, thanks,kevin |
Great product Bob. What is your recommendation for drilling the hole location:
Tighten the spinner and drill so the pin is snug up against the spinner? Drill the hole one thread pitch away so you can see if the spinner has moved/loosened? Cheers Greg |
Hi Greg
drill close to the spinner but leave a slight clearance to make it easier to insert the pin. These clips are fail safe rather than locking devises ,so make sure wheel is tightened with a lead hammer , mark the wheel and spinner to check for movement or safety wire. Full instructions are included with the clips. Bob 1619 952 4717 |
Hi Kevin
postage to UK 1 or 5 sets same cost - first class $15 or priority $25 with tracking. Will work on Trigos and most adapters or similar thread diameter. Cheers Bob |
Those clips look very nice. How the heck does one go about drilling the holes?
|
SPF1061
With the wheel off you should be able to drill 1/8 holes your adapter ,making sure you mark carefully and the holes are 180 degree apart. Easiest is to remove adapter and use drill press. Bob 619 952 4717 |
| All times are GMT -7. The time now is 05:57 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: