|
Are stock cam specs a myth or do they really exist?
**)I have been spinning in circles for a month trying to find out the answer to this cam spec question. Ready?, My 1995 5.0 HO. has been turned into carburetor system, has original block, Heads, Cam, Rockers, all stock. Is there someone on this earth that can tell me or show me the CAM Card specs I should use to have this run halfway decent. please help!
|
88 1/2-95 HO specs:
276/266 at .006 206/210 at .050 Lift with 1.6 ratio rockers .445/.444 Intake opens: 20* BTDC Intake closes: 76* ABDC Exhaust opens: 67* BBDC Exhaust closes:-19 Lobe separation angle: 115.5 |
This is by far the most compiled information that I have come across, Thanks so much for taking the time to respond. I will give your info a go.
|
If you plug in the numbers, that shows the cam timing is about 2 degrees retarded. I'm sure Ford did that for emissions. I'd give that thing some advance and get some snap out of it. A 115.5° LSA is way up there anyway....
|
| All times are GMT -7. The time now is 11:41 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: