|
Cobra replacement parts needed
Hello gentlemen. I'm new to the forum and would appreciate the help of the experts on here.
A client of ours owns a Classic Roadster 427. I've done some reading and am aware of the stories. Their website is still up but as you all know there is no response. We've been asked to personalize the vehicle for the lady that owns it. We are changing interior and exterior, incl. adding a rollbar hoop. I contacted Classic Roadsters to buy carpet and seats instead of getting them redone in different colors. Therefore my question to the experts is this. Should I employ our upholstery shop to get this done or should we buy a ready made (possibly molded carpet set from one of the builders that would match this car's contours. Also she would like to add some sort of headrests to the vehicle. Are there seats that incorporate those or should we include it in the rollbar hoop? Thank you for any and all suggestions. Best Regards Karl Troy |
Karl Troy,
I had mine done by a local upholstery shop that matched the colors of my Cobra and it was not only better quality carpet than they offered back then, but it cost less. As for the headrests, yes there are several different model seats that you can use that have them built in or you can put the headrest on the roll bar like some do. One guy here had 6 way power Porsche seats in his with the headrests. That is one nice think about these cars, you can do about anything you want so far as modifications. Ron :) |
Thank you Ron for the prompt reply. I will take your recommendation. How about purchasing a rollbar hoop opposed to fabricating one? I've done it before for a Devin SS and I'd really rather not do it again.
Thank you. Karl |
You could try to buy a rollbar from one of the vendors on this site like Actoncustom or Finishline. Or you could call Peter at ERA replicas or David at Kirkham to see if they would sell you one of theirs. For any of these, the fit may be different and require some work on your part.
|
I have an Acton Custom 1.5 inch diameter DOM rollbar for sale. Original style with third leg and trunk bracket. Feel free to PM me if interested.
|
There is a CMC here I've made a few parts for. He has a full width rollbar that he has taken off the car. Pictures of that one also available.
CMC Cobra 427 CMC Cobra 427 [] - - It's Free! : Acton Custom Enterprises, Custom Metal for Cobras |
Quote:
Thank you all for the replies. |
Talk to Double Venom he was making 3 point and 4 point roll bars for the CR's I think.
http://www.clubcobra.com/forums/clas...ll-bars-3.html Ralphy |
I'm buying Kevin's bar. Thank you to everyone again for your willingness to help.
Best Regards Karl |
Quote:
Best regards Karl Troy |
Hey Karl good talking. That was a good days work on starting the roll bar install. Looking forward to seeing how this project comes out.
|
| All times are GMT -7. The time now is 03:10 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: