|
Vinyl Decals Issue
I purchased the vinyl decals from Finish Line and some meatballs from another place. The decals on the side of the car seem okay with the possible exception of the lower ones that are near the exhaust pipe coming up a bit. However, the meatball on the hood seems to be having a very difficult time staying on...
Does anyone have any suggestions for how to better get these removable vinyl decals to stay in place? I do have stripe decals on the car (permanent) as well and they may be effecting the hood meatball as well... Thanks! |
If you are putting a static cling decal over another stripe decal you are never going to keep in down as it's not going to seal. If you like the vintage look of a meat ball then I would suggest you put the regular one on. They come off with a air dyer and not reusable but you probably would mess up your stripe also. If your stripes were painted you wouldn't be having the problem. I got my decals from Mike at Squier Design (1-800-865-5555) and you might call him and see if he has any recommendations.......... Squier Design
|
decals
Is the surface completely free of dirt, and wax?
I found with the amount of cleaner /wax I use I cant get masking tape to even stick to mine. Did you use a soap solution to apply? Good Luck. The Nut |
Quote:
I did not use any solution to apply any of the decals. Is it better to use just a mist of water or soapy water? |
I've found that if I clean the area first with warm soapy water and wipe it dry, then I use regular windex window wash to wet the area, use a squeegee (SP?) gently, over the decal, to remove the windex. Start gently, then more pressure until decal is dry. Let it dry overnight and they seem to stay on well. Not sure about over other decals. good luck
|
Meatballs
I have meatballs on my hood and trunk, the ones on the sides came off and one ended up melted all over my side pipe, what a freakin' mess. The small stickers worked great. I do not believe I will put anymore large meatballs on the sides. I have a racing stripe and the meatballs seem to be clinging very good, just be sure the surface is clear of particles and wax, not sure why the sides came off?
|
| All times are GMT -7. The time now is 01:52 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: