|
wind wing needed
hello, anyone have a drivers side wind wing they want to sell? without hardware is ok. FFR
thanks michael knightroder@netzero.net |
Michael,
I don't have a wind wing to sell but if you have a glass company near by you might do what I did. I took one of mine down and had one made out of Lexan. It looks just like the glass ones but will not break like they do at times. Ron |
thanks, that might be the way to go, just never had any good luck drilling the holes then counter sinking.
|
I have four or five wind wings at my shop. Can you post a pic of the either wing. If I remember correctly I have several different types.
Dwight |
ffr style
1 Attachment(s)
|
I had a few sets of made of lexan. It isn't like messing with plexiglass. You can drill it without a problem and they are close to indestructible. I had tinted ones made to match the wind wings. They charged me $40 for the set and they are 1/4" thick. You can hit them with a hammer and they won't break.
|
I was pleased with how easy the Lexan, I got on line, was to work with. Used a band saw, a table saw, and a router to crank out wings and visors in tint to match my '03 Caddy Copper Sunburst paint. Just something else I did a little different from the thundering herd. Kinda nice to come up with something that is easy and doesn't require a second mortgage.
|
You might check out Finishline...I believe a 50% off sale is on right now.
John |
Finish Line
|
Quote:
|
finishline
with the big sale going on, will be awhile till they get caught up, to check inventory, however it is worth the wait.
thanks |
To the OP,
There's a set of FFR windwings for sale in the classifieds right now on FFCars.com : Factory Five Racing Discussion Forum HTH, Will |
got em
thanks, posted 8:24am sold 8:44am
thanks again |
keep forgetting
i keep forgetting that there is a FFR forum and a Factory Five Forum,
thanks for the heads up again, the one i made on sunday is good till i get the new replacement one |
Which way is the hinge supposed to go. Bracket on the outside or inside the wing?
If I mount it on the outside, it interferes to easily if you swing it to close. JD |
sitting in car
bracket on inside sitting in car. ffr see pic above
|
It looks like the window bracket is outside. ?
JD |
| All times are GMT -7. The time now is 07:51 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: