|
Need a spacer
I am trying to locate a collector flange spacer for an SPF small block. I need one that is tapered 1/2" to 1/8". I called Craigs Cobras, and he is going to be out of pocket for awhile, and I am looking at 1mo or more to get one. He mentioned some one else who mentioned having one, but I did not catch the name.
If any one has one, or info for another source I could use a little help. Thanks, excop |
just a bump
|
check FFCars.com : Factory Five Racing Discussion Forum site.
They use a lot of tapered spacers. 1/2" is a lot. are these the spacers between the headers and sidepipes? Dwight |
I have one of Craig's spacers in stock but not 1/2". That's a lot....perhaps there are other issues going on? Mu spacer is likely 3/8" on the thick side.
PM for details. |
Thanks for your help guys. After looking at the problem from a different angle, I think I will lower the opening instead of raising the pipe.
This all started with different pipes, trips to the dyno, weekends at Hallett raceway, different tires, the typical Cobra sickness. I have since moved, so no more Hallett. I have proved to myself I can go fast, so I think I will just cruise the curvy roads, and enjoy the car at a more moderate pace. |
spacer
If you decide you need one, pm me and I will see what I can do. Just made one for my B&B and saved the programs. It is probably the same pattern.
Pat |
| All times are GMT -7. The time now is 03:33 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: