Club Cobra
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Hemi Powered AC Cobra! (http://www.clubcobra.com/forums/all-cobra-talk/130168-hemi-powered-ac-cobra.html)

BAsque1 08-20-2015 04:23 PM
Hey which is the manufacturer of those rims? are they 15"? Where can I get a set like it?
Tks
Lou

BAsque1 08-20-2015 04:29 PM
1 Attachment(s)
Quote:
Originally Posted by Ron61 (Post 1314106)
Jay,

At one time back in the early 70s a guy near here put a 60s era 426 Hemi in his original Cobra and had it in there for about 4 months until he learned that he was destroying the value of it. He had kept the original 427 so he had it all put back original. He sold it some time ago for just over $600K.

Ron
Hi Ron:
Call me a purist, but in my opinion a Cobra with anything other than Ford in my mind is sacrilegious. No offense to those who have installed any other brand of powerplant.

HemiSnake 08-21-2015 12:58 AM
Quote:
Originally Posted by BAsque1 (Post 1359868)
Hi Ron:
Call me a purist, but in my opinion a Cobra with anything other than Ford in my mind is sacrilegious. No offense to those who have installed any other brand of powerplant.
I respect your opinion and yours looks awesome!

As far as my objectives, I never wanted to replicate something. I was out in a few that were very close to original and the question "is that real?" started to get annoying. My neighbor has a real one and when out in that one..., well you get the picture.

I was out to build a trackable hot rod that happened to have a Cobra body. Once the E-M kit offered a custom coilover suspension based on a Chevy, I figured I'd spread the love across all 3 of the Detroit Muscle and drop in a Mopar. Besides, the HEMI has been my favorite power plant since I can remember. The build was a lot of fun and the car is still running strong. Lucky I couldn't figure out the electronics, otherwise I'd be running a Cadillac Northstar V8 Twin Turbo...

In fact I'll be a Blackhawk Farms raceway this weekend turing as many laps as possible. It's hard to beat a 528 with side pipes running flat out.

RET_COP 08-21-2015 03:24 AM
That engine did not sound nor spin up fast enough to be anything extraordinary.
I like the hood scoop HemiSnake, Custom design or bought and trimmed!!?

BAsque1 08-21-2015 05:54 AM
Quote:
Originally Posted by HemiSnake (Post 1359917)
I respect your opinion and yours looks awesome!

As far as my objectives, I never wanted to replicate something. I was out in a few that were very close to original and the question "is that real?" started to get annoying. My neighbor has a real one and when out in that one..., well you get the picture.

I was out to build a trackable hot rod that happened to have a Cobra body. Once the E-M kit offered a custom coilover suspension based on a Chevy, I figured I'd spread the love across all 3 of the Detroit Muscle and drop in a Mopar. Besides, the HEMI has been my favorite power plant since I can remember. The build was a lot of fun and the car is still running strong. Lucky I couldn't figure out the electronics, otherwise I'd be running a Cadillac Northstar V8 Twin Turbo...

In fact I'll be a Blackhawk Farms raceway this weekend turing as many laps as possible. It's hard to beat a 528 with side pipes running flat out.
Oh please don't get me wrong, if there is an engine that I love as much as I do my Side Oiler is the 426 Hemi, I would love a 1970 Charger with a Hemi, I just prefer to stay within the brand name. We restored an 83 Jeep CJ-7 and kept the 258 in line 6 not to install a Chevy SB 350 and not been able to find a decent AMC 304.

Buzz 08-21-2015 06:05 AM
Quote:
Originally Posted by BAsque1 (Post 1359868)
Hi Ron:
Call me a purist, but in my opinion a Cobra with anything other than Ford in my mind is sacrilegious. No offense to those who have installed any other brand of powerplant.
No offense taken, all in good fun and certainly no offense intended, but this is what makes me smile about the whole "sacrilegious" thing: Here's a guy with a very nice but big, long, heavy, bulging, solid axle fiberglass car with a cushy custom interior that bears only a loose resemblance to a Cobra claiming to be a Cobra purist because he's running a 427 FE engine. **)

Could I then stick an FE into any old 2 seat fiberglass kit like - say - a Devin, slap on a roll bar and side pipes and declare it a Cobra? The West Coast cars are well liked by their owners for the extra size and comfort, but to me a low-slung, lightweight, 90" wheelbase, IRS equipped car with a spartan interior and an accurate looking body is far more "Cobraesque" in spirit and character, regardless of the brand of engine - or transmission for that matter (as long as it's manual) - that the owner chooses to use.

HemiSnake 08-21-2015 07:37 AM
Quote:
Originally Posted by RET_COP (Post 1359923)
That engine did not sound nor spin up fast enough to be anything extraordinary.
I like the hood scoop HemiSnake, Custom design or bought and trimmed!!?
Back when I ordered the car, Everett-Morrison was selling the larger scoops as an option. I wasn't sure if I really needed it, but figured it couldn't hurt. Turns out I still had to remove my 1" carburetor spacer.

Here are some pictures from my factor tour back in 2000. You can see of the raw scoops in there Everett-Morrison FL Factory Tour

HemiSnake 08-21-2015 07:41 AM
Quote:
Originally Posted by BAsque1 (Post 1359866)
Hey which is the manufacturer of those rims? are they 15"? Where can I get a set like it?
Tks
Lou
Was this at me Lou? If it was, those are 17" wheels with a custom made offset by Boyd Coddington. Here are more of the specifications: Hemi Snake

HealeyRick 08-21-2015 08:59 AM
HemiSnake,

Congrats on putting together the car that fueled endless discussions when I was in high school: "Can you imagine what a Cobra would do with a Hemi in it?" We also discussed what a Hemi would do in a Bugeye Sprite and that's been done, too: Untitled Document

http://i61.tinypic.com/2nget7r.jpg

BAsque1 08-22-2015 03:07 AM
Quote:
Originally Posted by HemiSnake (Post 1359944)
Was this at me Lou? If it was, those are 17" wheels with a custom made offset by Boyd Coddington. Here are more of the specifications: Hemi Snake
No this was for the NewYork guy who posted the dyno run.


All times are GMT -7. The time now is 02:28 AM.
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: