|
8 stack FI issues
Roush 427R, Imagine 8 stack FI, MSD 6AL, MSD Blaster 2. All controlled by
Easy EFI 1.0. Have AFR set at 14.2 idle, 14.5 cruise and 12.8 WOT as per Imagine FI in AZ. Set up run but don't exactly know what to put for fuel pressure and flow. Starts, but needs a bit of throttle even after the pre squirt, and idles ok, set at 1000 rpm as per Roush 427IR specs. Revs and runs fine with no load. When driving the AFRs don't seem close to the set values but runs ok until I give it a bit of throttle as if to pass, then it hesitates/bogs down. I was watching the AFR today and it went from 13. 6 or so to 15.9 when giving it that throttle amount. Also does it leaving a stop in first gear unless I rev it a bit first. Thoughts? Herc |
Usually one one topic is needed. See my reply in the other one (the better place)
|
| All times are GMT -7. The time now is 04:27 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: