Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Engine Removal (http://www.clubcobra.com/forums/all-cobra-talk/131602-engine-removal.html)

jhv48 11-09-2014 07:58 PM

Engine Removal
 
Here's one for you mechanics and do it yourself guys.

About How many hours should it take an experienced mechanic and a well equipped shop to R&R a small block ford engine in an SPF cobra?

The reason I ask is I am going to have to pay a shop to R&R my engine and I have gotten estimates anywhere from 4 to 25 hours. And since I'm paying shop rates, I want to better arm myself before I try to negotiate with them.
I figure you guys have pulled more cobra engines than Carroll Shelby ever did.

lippy 11-09-2014 08:28 PM

It took me about 5 hours to install a fresh FE in my cobra with a bunch of friends. But then I had to spend a few more hours getting the trans and clutch ready to go, priming the oil pump, getting the timing in the right ballpark, adding fluids, etc. So say 8 hours total for a new install, and maybe 5 to remove an installed engine. And I'm no pro.

bobcowan 11-09-2014 08:40 PM

Starting with draining the radiator, it takes me about 4 hours to pull the engine and get it on the stand. In my garage, by myself, with a harbor freight crane and mostly hand tools.

DanEC 11-10-2014 04:57 AM

You could probably save them some time by prepping the car a little - removing hood and transmission tunnel before taking it in. With open accessibility they should reasonably have it out in 2 or 3 hours I would think To remove, prep and replace I think 8 hours is not unreasonable - but that might be a little tight for all the final adjustments and getting it up and running and in tune depending on if they run into any problems. I will go with 8 to 10 hours.

Rick Parker 11-10-2014 08:14 AM

Yes REMOVE the "Bonnet" and insist they use fender covers on both fenders and around the entire engine bay. This is non negotiable!!

1985 CCX 11-10-2014 09:05 AM

Mine was slow overall but I would guess 3-4hrs installed.
Probably the same on the re-install

Wiring is limited
Mounts are easy
Headers
Radiator fuel delivery
Bellhousing

That's about it...... :rolleyes:

jhv48 11-10-2014 04:24 PM

Thanks, I thought about 8-10 hours from pulling to reinstalling and setting up should be sufficient. Now to head to the shop and negotiate a price.


All times are GMT -7. The time now is 09:27 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: