|
Quote:
I don't see a cross bar, do you?:D http://www.mgexp.com/phile/71/232715...1964_fifth.jpg https://encrypted-tbn1.gstatic.com/i...ceflIW-fSHUwkA |
Quote:
Now you have to tell Shelby American Inc. that! http://www.30npire.com/sites/default...4%20redone.jpg |
1 Attachment(s)
They learned as they went on. Jim
|
Made my bungee cord mounts today using SSTL 3/8 x 1-1/2 fender washers. I opened up the ID to 9/16", and then used a template to drill the 3 mounting holes in each. I ended up not countersinking the holes
http://i23.photobucket.com/albums/b3...psbbe949fa.jpg http://i23.photobucket.com/albums/b3...ps0eb848e0.jpg http://i23.photobucket.com/albums/b3...ps96f76552.jpg Tomorrow I'll get some 400 and 600 grit wet sandpaper to give them a brushed finish |
Now that's what I like to see... precision!
Larry |
High end drilling, nicely done.
|
1 Attachment(s)
The original plates were made from aluminum that was slightly thicker than the body material and were fabricated and riveted to the body...the reason for the plate is to act as a doubler for the body, the reason for the original fabrication was so that once riveted the plate would conform to the shape of the body.
|
| All times are GMT -7. The time now is 12:53 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: