|
What upgrades do you have planned
If I seem envious if those who have driving weather year round it's because I am. Now that the weather in the northeast seems to be changing its apparent that the winter lay up isn't that far off.
I'm contemplating a wheel upgrade from 17's to 18's, an LSD to get away from the open diff and some driving lights for the dark nights. A few cosmetics are going to be addressed and led's for the taillights. So what do you have planned? |
For comp car.....
1) Fuel gauge adjustment. Requires a bit of work to gain access. 2) Glove box and glovebox door installation. 3) Some touch up painting. Frame in particular where summer welding messed up paint 4) Adustment of wiper motor and rod 5) Install updated tach and speedo cable. Street car 1) Complete frame welds via Perfection Metals 2) Prime and paint frame 3) Install rear differential. Parts designed by myself (just like I did on comp car) fabricated via Racewhere. 4) Atach body to frame parts Sagebrush, Racewhere and ERA 5) Alloy work by my friend at Panel Craft 6) Paint via Restoration Station "deep blue" 7) Install inner alloy panels via yours truly 8) Motor via Cobra Automotive 9) Assorted parts via Racewhere 10) Begin electrical and dash set up. (Thanks Mr Wagner) Phew guessing only time will limit expectations. |
New airintake for motor
new camshaft new dashboard layout check all electrical wires |
Taller roll bars to meet the broomstick rule
Upgraded front ball joints Road force balance all 4 wheels Full alignment |
Going from Billboards to Avons...
|
I'm ditching the distributor for wasted spark coil packs driven by the megasquirt. I've machined a distributor plug to drive the oil pump and bought the parts. I need to pull the megaquirt and add 4 coil drivers and the associated wiring. I'll be glad to be rid of the MDS parts.
|
Oh, clarification, we're just getting into our diving season. I'm gearing up for this in December.
|
I'm adding gas. We drive all year long.
|
Electrical oil pressure gauge
Turkey pan at some point Ball Joints (in the mail) Oil cooler shroud Sway bar upgrade kit Thats about it Steve H SPF 1764 |
Looking for an Arntz/Butler project car. Put in a Fast Cars front end and an all aluminum Chevy small block stroked to 427 cubes with fuel injection all tied to a nice 5 speed.
|
Quote:
|
Quote:
|
Octane booster with lead!
|
Complete Repaint and webers or 8 stack injection
|
| All times are GMT -7. The time now is 09:28 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: