| frankym |
11-02-2015 04:05 PM |
Knock Off Wheels on Pick Up trucks
curious if anyone has attempted to put shelby knock offs such as PS Engineering or Vintage wheels with the real spinners onto a full size pick up truck. I don't know if the 4WD hubs are an issue for a trigo style adapter. if anyone has experimented or has photos - I'd love to see what they look like!
|
| strictlypersonl |
11-03-2015 05:04 AM |
I would be reluctant to put wheels designed for a 2500 lb car on one that weighs twice that, and has more left/right weight transfer too.
|
| frankym |
11-03-2015 08:10 AM |
I think that is a good point, and I never considered whether or not weight would be an issue. I believe that many of these heavy trucks have lighter weight aluminum wheels, not sure what the knock offs are made of. Certainly will read up on max weights for vintage and trigo like wheels.
|
| Mark IV |
11-03-2015 08:27 AM |
The adaptors will not fit with front hubs on a 4X4, a 4X2 will. However again the weight rating on the adaptor and wheel will not allow any payload. Take a 2600# Cobra and divide by four. A 6000# GVW light duty pickup will almost double the loading.
|
| Jac Mac |
11-03-2015 12:06 PM |
Quote:
Originally Posted by frankym
(Post 1370067)
I think that is a good point, and I never considered whether or not weight would be an issue. I believe that many of these heavy trucks have lighter weight aluminum wheels, not sure what the knock offs are made of. Certainly will read up on max weights for vintage and trigo like wheels.
|
Those trucks with alloy wheels have 8 or more wheel studs and they are on a much larger pcd than most car applications! Not only the weight but also the wheel offsets involved in some truck applications would grossly overload a knock off / pin drive setup.
The only vehicle I can think of that even approaches what you suggest was the UK Ford Transit Supervan which was a publicity stunt of essentially dropping a van body over GT40 mechanicals, don't think there was anything of the Transit running gear used and I don't think it ever hauled much payload!!:) |
| Armrer |
11-03-2015 07:26 PM |
Lynn Park has knock off Halibrands on a '56 F100. Looks pretty damn nice towing Cobras..:)
|
| Jac Mac |
11-04-2015 01:46 AM |
Quote:
Originally Posted by Armrer
(Post 1370133)
Lynn Park has knock off Halibrands on a '56 F100. Looks pretty damn nice towing Cobras..:)
|
After reading your post I searched and found an article about Lynn with a pic of his F100 with the Buick Motor & knock off wheels, to put your mind at ease why don't you contact him and ask if its ever been a problem on his truck, sounds like he uses it to tow his cobras and dragster to events. nothing better than getting real info from someone who's been there and done that!:). |
| All times are GMT -7. The time now is 01:27 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
