| frankym |
11-23-2015 11:30 AM |
Valve Lash on a Coast High Performance 427 (SBF Windsor)
Hey all,
Trying to figure out the valve lash setting for my motor. It's a Coast High Performance carbureted motor based on 351 Windsor. Has AFR heads and edelbrock intake. We are removing the heads and trying to anticipate (assuming it's a solid cam) what the valve lash is so we can properly adjust them. If it's a hydraulic cam, the valves get set to 0. Does anyone know if there is a benchmark guide for lash assuming a solid cam?
|
| blykins |
11-23-2015 12:18 PM |
You would really need the cam specs. Solid rollers can vary in lash from around .016" up to .030", depending on the lobe profile.
No documentation on the engine?
|
| frankym |
11-23-2015 12:35 PM |
I am going to see if CHP/Probe Industries can provide a build sheet based on the block casting ID.
|
| All times are GMT -7. The time now is 05:51 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
