|
Motor Mounts
So I'm putting a 351 stroker where my 302 was sitting. I currently use the Anchor 2329 motor mounts. These are the ones with one bolt that goes into the frame. I bought the car with a SBC in it originally so i fabbed my own mounts. So here's the issue, the motor needs to be dropped 3/4" -1" for side pipe clearance. Does anyone know of a direct replacement lowered mount in this style? Anything different dimensionally will require too many changes in the driveline if it's not a direct replacement. LMR makes a solid mount that looks like it might work (LRS-6038DS).
Any thoughts? |
| All times are GMT -7. The time now is 01:14 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: