|
Look forward to seeing this in the first person..... :)
|
What are the cutouts on the top for?
Larry |
areomotive install
1 Attachment(s)
this is the EXACT location it needs to be in a CSX car. it fits perfect
|
Quote:
|
1 Attachment(s)
All these fuel tanks need something to hold them in place.
Today's job, get fuel tank straps ready for powder coating, these are for 427 cars. |
Quote:
Looking great. For your powder coating, I have a "Group Buy" from the company Jet-Hot. If you're interested let me know. http://www.clubcobra.com/forums/all-...ml#post1474115 |
Quote:
I will keep the coating option in mind. I have a very good working relationship with the two companies I use local for powder coating. Cheers |
Ok, let me know if you want to join. 👍
|
Keep in mind that the tank Craig made for me is a 289 tank, behind the seat and not under the rear.
The cut outs are for me to get around the extra frame support with the units PU and filler neck. Gives dead space above once full up. I'll post on the 289 link when I get started :o |
Hi,
I’m looking to replace my CSX 4000 series gas tank. Looking to go without a fuel cell as I don’t track the car. Could you send me some info on options, prices, and time frames for your tanks? Thanks in advance, Jon Trimble |
Quote:
My 289 tank perfect and the 42 gallon 427 tank I bought a work of art. I recommend highly |
2 Attachment(s)
Thanks Jeff.
Here we have a fuel tank just finished for a 289 street car. |
Very nice work!
Larry |
Looks Great!
|
1 Attachment(s)
Working on a fuel tank for one of my favorite cars, Jeff's red Hi Tech, ( soon to have a colour change) for the most part we are using the same shape of the old tank from the car.
We have added a little volume and some bead rolls to the bottom of the tank along the lines of the large original tank. |
1 Attachment(s)
We folded the front and rear sides, add the baffles then the top panel.
We are using the fill and pickups from the old tank as well as the fuel level sending unit, this way it should go back together with out issues. Well that's the plan.:) |
Look forward to installing it into HTM111.
|
2 Attachment(s)
Drain plug added, all set to go back into the car Jeff.
|
Needs rock protection!
Hi,
Looks great. On my previous cobra I had an aluminum tank made and ran it less than a year then a rock hit it at 65 MPH and cracked the weld, aluminum is brittle. What a pain to drip gas all the way home. Then nobody would fix/ weld it as it had gas in it. So eventually a shop filled the tank with argon and welded it for me. I installed second skin on the forward side of tank:mad Now my F5 cobra has the mustang tank and shield! Perry. |
I look forward to installing in HTM111, will be a great addition and will serve as a great improvement in appearance/performance.
|
| All times are GMT -7. The time now is 01:12 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: