|
White Pipes - Redux
1 Attachment(s)
I finally found out some white paint that works on exhaust. Alvin High Temp Pure white with the gray primer is what I used. I had my pipes media blasted first and then power washed .I primed and let sit for 24 hours. I then applied the paint in two thin coats with about 20 minutes between coats for drying. I then used a friends infrared heater and baked them on each side for about a half hour at 180-190 degrees. The paint has stayed on and has not changed color even at the header collector pipes. This is the first stuff that I have had success. The VHT stuff always yellowed. A picture is shown below.
Phil |
Good to know. Keep us posted on the longer term durability. I went through this nightmare last year with VHT. Did a similar scientific curing procedure you described. Freshly media blasted base, and their primer each time. One repeated failure after another and I followed their directions to the letter each time. Total waste of time and money. Got some cheapo Rustoleum BBQ paint (came in white) and it worked far better than the VHT. It changed color a bit at the collector but it didn't flake/bubble off like the VHT did.
|
Looks great! i keep thinking I need to throw some white on mine. Maybe just for a short period. looks so "Race"
|
I found what I think is the paint (SKU 290-00), but I'm not sure about the primer.
|
The primer is simply the gray. You can order it from the following:
Net4Sale.com 774-323-3176 I think the key is baking it on. Once it's on and cured it's also easy to touch up. I like it because it stays white. Phil |
Zinc Dust Primer is SKU-013-345 at $11.95 a can. There is definitely something different with this paint. the primer seems heavier. I have had it on about two weeks with no flaking or pealing or discoloring and I have heated the pipes up significantly. (:
Phil |
| All times are GMT -7. The time now is 11:00 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: