|
Classics Roadster Brake Pads/Frt Wheel Brgs??
have a Classic Roasters Cobra from Fargo , North Dakota built by
Shelby American in Los Angeles, Ca. I need front wheel bearings and new brake pads front and rear. I need to identify the front and read pads used and also the bearings are for what model mustang II????? The calipers look like older GM single piston calipers but i'm looking for someone who also has a Classic Roadsters Cobra to tell me that they used in the build. Thank you |
If the front hubs are Mustang II, there's only one set of wheel bearings with the stock brakes: A12/A13. They may have changed the rotors/calipers because the MII brakes were tiny (~10" diameter, I think). If so, the bearings might be different. Measure the rotor diameter first. You might look through the pictures on rockauto.com to match up to what you have and/or take your stuff apart to check on the part numbers.
|
| All times are GMT -7. The time now is 06:55 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: