|
SPF oil filter mount plumbing
Hi
I'm in the process of doing the routing for a Canton oil cooler thermostat: the filter mount has arrows showing an in and out on both sides, the line with oil in goes to one side and the oil out of the filter to the cooler is on the oppposite side. Is there any reason that both lines couldn't be on the same side? Routing will be easier that way... Steve H 1764 |
In and out can be on the same side. Just make sure that the plugs on the other side are sealed well.
|
Original Cobra found in PA!
1 Attachment(s)
Attachment 31303 Such a tragedy! I mean that it was built!
|
| All times are GMT -7. The time now is 01:52 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: