Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Brakes sometimes dragging (http://www.clubcobra.com/forums/all-cobra-talk/140978-brakes-sometimes-dragging.html)

chrisd0729 05-27-2018 08:45 AM

Brakes sometimes dragging
 
Just turned 650 miles on new to me, 2017 BDR. last 3 times i had it out, the brakes start dragging like I’m riding the brake. Can’t tell yet if it happens cause they’re heating up or when I stab them for a hard braking.... definitely seems to happen right after driving it hard though. If it just sits for 5-10 minutes, they let go and free up. When it happens, they sometimes drag hard enough that it stops the car quicker than engine breaking and really heat up quick. Then I need to pull over and wait for them to cool down. Any thoughts on what could be causing it and how to troubleshoot/fix.

I confirmed, it’s both front wheels when it happens, not limited to a single caliper.

spdbrake 05-27-2018 12:01 PM

I recently read on this site a new BDR with sticking calipers (leaked as well if I remember right) that had been Powder coated while still assembled (pistons/ etc...) and baked in the oven by the Boynton Bch folks.
Another new BDR had a bad Brake booster. I assume it was applying pressure and not retracting.
If you can while the brakes are hot pull a front wheel and crack the bleeder screw. If its under pressure and brake frees up then its upstream in the Master or Booster. To isolate the booster disconnect the Vac line at the booster and leave the booster port open. Plug the vac line with a bolt. Take another test drive.

chrisd0729 06-29-2018 05:37 PM

Interesting find.... just had it happen again and i jumped out and pulled the vac hose from the brake booster. It sucked in a quick puff of air and the brakes immediately released. How can i find why vacuum is getting pent up and sucking in the brakes??

Gaz64 06-29-2018 06:31 PM

Booster pushrod needs to be shortened.

Is it adjustable?

spdbrake 06-29-2018 06:39 PM

Def your booster then.
Unfortunately the atmospheric vacuum vent is inside the booster or could be the main return spring.
AGCO Automotive Repair Service - Baton Rouge, LA - Detailed Auto Topics - Vacuum Brake Boosters
http://images.thesamba.com/vw/gallery/pix/1246835.jpg

http://repairguide.autozone.com/znet...528004b46b.gif

https://www.abqjournal.com/551155/fa...rake-lock.html


All times are GMT -7. The time now is 07:45 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: