|
Pcv and brake booster plumbing
1 Attachment(s)
Never one to leave well enough alone, i never liked the idea of pulling in extra air for the pcv asymmetrically i ran two lines from either side of the plenum for the pcv with the intent of balanced extra air to the engine. The brake vaccum is tapped off the back which im not woried about as there is minimal flow there. The pcv hoses are matched length to a tee, then to a morosso oil separator and finally to a wagner pcv valve.
Its really handy plumbing to the manifold as its much quicker to pull the carb, and in my case with a holley xp, theres no vac ports anyway... |
Ps
Look how clean the inside of the manifold stays with the oil sep in the PCV circuit...I drain about a tablespoon of oil every tank...
|
| All times are GMT -7. The time now is 12:42 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: