|
Jaguar Rear End Driveshaft Yoke
Looking for a XKE rear end driveshaft yoke and also a front yoke and spline for a Muncie 4 speed.
I need to build a driveshaft that goes from a Muncie 4 speed and will connect to a Jaguar XKE rear end flange. At this point all I have is the Muncie front yoke and spline that Tom sent. I need everything else to mount Jag parts to the driveshaft to the rear end. Thanks, Jim |
Just to be clear, you're not looking for the yoke for the pinion on the rear differential? I only ask because I recently rebuilt a rear diff with Dana 44 gears and I'm pretty sure I have the factory differential yoke sitting around somewhere. I'll take a look to see if I have the driveshaft yoke this weekend, but I'm nearly positive it got scrapped with the driveshaft so don't get your hopes up.
|
I have a front yoke and spline for a Muncie 4 speed. Send me your info and it's your's.http://www.clubcobra.com/photopost/d.../IMG_3495s.jpg http://www.clubcobra.com/photopost/d.../IMG_3496s.jpg
|
Check with Terry's Jaguar...
|
Mid-South Gear in Knoxville, TN.
Talk to Butch Capps, he is a Cobra guy and rebuilds a lot of them. |
Bearwolf, I'm looking for the yoke that bolts to the rear differential, maybe I'll get lucky and you'll still have it!
Tom, PM sent. Thanks, Dan & Jeff -- Jim |
Jim, it's in the mail. Check your PM
|
PM replied to.
Thanks ! Jim |
Call Jag Bits
|
Thanks,
Jim |
Jim,
I'm not sure what you are looking for with regard to the Jag rear differential. I have a Jag XJ6 rear differential assembly that had the driveshaft cut off about three inches from the rear universal joint. If you are looking for "the rear driveshaft universal joint and flange" which bolts to the flange bolted to the differential pinion shaft, I have one. Let me know if that is what you are looking for. John |
Jim,
I'm not sure what you are looking for with regard to the Jag rear differential. I have a Jag XJ6 rear differential assembly that had the driveshaft cut off about three inches from the rear universal joint. If you are looking for "the rear driveshaft universal joint and flange" which bolts to the flange bolted to the differential pinion shaft, I have one. Let me know if that is what you are looking for. John |
PM sent
|
Well the bad news is I cant seem to find it. I must have just thrown the whole drove shaft in the scrap bin knowing I'd never use it. If I run across it it's yours, but even though I dont remember scrapping it, that's probably what happened. Sorry
|
No problem, Bearwolf --
Thanks for looking for it. Jim |
Thanks to John ERA174 and Tom Howland I now have the parts needed to have the driveshaft built.
Jim |
| All times are GMT -7. The time now is 04:11 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: