Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Manufacturer of this wheels (http://www.clubcobra.com/forums/all-cobra-talk/142487-manufacturer-wheels.html)

BAsque1 06-22-2019 08:36 AM
Manufacturer of this wheels
 
1 Attachment(s)
Good morning folks:
Does anyone have any idea on who is the manufacturer of these wheels?

NRP/MN 06-22-2019 08:42 AM
Looks like a Minilite or similar style.

CompClassics 06-22-2019 08:58 AM
It says “Minilite” on the wheel. I believe Panasport might have owned them at some point.

NRP/MN 06-22-2019 11:57 AM
I purchased a couple sets of Minilites for a vintage Boss 302 Trans Am car I owned in the past. They are manufactured in England and imported. The company I purchased them from ( Main Street Motors I think) does not seem to be around any longer but there is a "MiniliteUS" website. Hope this helps.

CJ428CJ 06-22-2019 06:31 PM
If you're looking to just replace one, these probably aren't close enough but if you're looking to buy a full set they're really close.
RM1 Classic Minilite Design Alloy Wheel | Image Wheels

Chris

krausewich 06-22-2019 10:02 PM
ET Wheels by Team III Wheels

These will get you close !

eschaider 06-22-2019 11:00 PM
Vintage offers those wheels from 13" to 17". Click here => Superlite


Ed

t walgamuth 06-23-2019 05:42 AM
Thanks Ed!

I am looking also for some wheels that fit my car and needs.

Ron Scarboro 06-23-2019 06:36 AM
All the suggested wheels are 2 piece if that matters to you. For a one pice, likely have to go here.

https://www.minilitewheels.us/styles

Ron Scarboro 06-23-2019 06:38 AM
All the suggested wheels are 2 piece if that matters to you. For a one pice, likely have to go here.

https://www.minilitewheels.us/styles

eschaider 06-23-2019 11:29 AM
Ron's source is likely to be the same as the wheel you already have so, other than the difference in appearance attributable to age, the replacement wheel should be identical to the old wheel.

The Vintage wheel will look very similar but things like the cast in place lettering on the wheel will be different. Although the Vintage wheel is in fact a cast one piece wheel if someone looked at one of your original wheels and then the replacement wheel, the different cast in place lettering would be a dead giveaway.

As long as the Minilte alternative is still available I would probably go that route just for continuity.


Ed


All times are GMT -7. The time now is 08:20 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: