|
Roll Bar Cross Member
I want to install a roll bar cross member on my car to raise the shoulder harness height.
The only supplier I have found is Finish Line, but they are out of stock for the 1-1/2 inch bars. I could put in a spacer. Anyone here done one this way? My car is a Unique 289 fia. If you have a used one for sale in either size I would be interested. Thanks in advance. Ken |
I might have one measure the rollbar and tell me the distance Between the vertical 1-1/2 tubes center to center.
Tom |
The center to center distance is 12 inches. Tjd, is yours the same style as the one by FinishLine? Thanks.
|
| All times are GMT -7. The time now is 04:31 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: