|
Original 1965 427 Cobra street roadster shock absorber info needed
Hi all. Can anyone tell me the specs of the original 427 Cobra street roadster rear shock absorber and coil spring.
1) Shock absorber length (eye to eye) fully extended and fully compressed 2) Coil spring length, ID, OD and spring rate (lbs per inch) Thanks for your help. Cheers Greg |
Does anyone have the spring info I'm looking for?
Cheers Greg |
There are specs in the 427 Driver's Handbook (and all the fake knock-offs on line). Could be right, could be wrong....
|
Hi Patrick. Thanks for the info. I had seen that info about the shock absorbers.
But info about the springs is still elusive. Cheers Greg |
| All times are GMT -7. The time now is 05:46 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: