|
Front Quick Jack grommets...
Hi All,
I am on the hunt for some thinner grommets for my front quick jacks on a fiber body (about 1/4" thick in that area). I have the Finishline pill shaped ones with the angled hole, but they seem a bit large and I will need to file back the body a bit to get them to fit. Was hoping to find a full rounded version from the frontside to the backside through the bore, almost like would be used on a cable pass-through. Something with a larger diameter, that could be pushed in to fit the oval. I have some thin silicon ones on the rear which will be very discreet. I was interested to read/see what everyone else is using for grommets.. ?? Thank you, Mike |
|
Hi SPDBRK,
Those are the ones I have and may be looking to replace... I suppose I am looking for more of an O-Ring with a channel on the outside. Something just to dress the opening. Mike |
If your glass is too thick but the shape is correct you can cut the inboard section off leaving just the groove. Then glue it in place with black rtv and cleanup w/isopropyl.
|
| All times are GMT -7. The time now is 05:44 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: