|
Need some help with trunk aluminum fabrication
Hi Guys,
It is time to begin the installation of aluminum sheeting in the trunk of my EM Cobra. I found a 48" finger brake that plan to buy tomorrow, but I need to know the thickness of the aluminum panels in the trunk to make sure the brake will bend it. Any information on the gauge of the aluminum and trunk pics will be helpful. I do plan to frame the trunk with 1" square tubing to support the aluminum panels, so any help with this would be helpful as well. Thanks, Martin |
| All times are GMT -7. The time now is 06:25 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: