|
Halibrand Wheels lug nut covers
Hi all. I'm looking for one or more of the Vintage Wheels Halibrand wheel lug nut covers number LC01. (see pic).
http://www.clubcobra.com/photopost/d...cover_gray.jpg Or other brand of a similar lug nut cover. Vintage Wheels is sold out. Cheers Greg |
Or beg , borrow or rent one to use as a pattern to make a pattern/mold to make fiberglass ones to fit my wheels.
Cheers Greg |
ET mags
|
|
Quote:
|
|
ET wheels it is.
Thanks guys. Cheers Greg |
I am sorry that our cover will not fit this wheel.
Regards, Jin On 6/23/2021 4:59 AM, Clinton Symons wrote: Have original Compmotive Halibrand wheels and need lug covers, do you have any that will work? |
Quote:
These are $30 each from FFR vs $145 for four and low profile lugnuts from ET. #15376 - Halibrand Replica Wheel Lug Cover - Factory Five Parts Catalog |
Quote:
http://www.clubcobra.com/forums/tire...ut-covers.html |
Quote:
|
Hi guys. Thanks for the info. Ordered two from F5.
Cheers Greg |
lug covers
The lug nut cover was pioneered by ET Mags /Team Three Wheels Inc. for our AC-3 wheel, 20 years ago. We have made 2 versions , 1 for the early sand cast wheels and another for the permanent mould wheels, Each was designed to fit the wheel perfectly. The cover is stamped aluminum, textured and painted to match the wheel finish. It is retained by our forged decorative knock-off to give the look of a true pin-drive wheel.
The cover has been copied by others , but all ways as an after though, so the fits are not there. I think with a little bending, sanding and painting ours might fit other wheels, but it will require some time on your part. We make replacement Knock off spinners for Compomotive, PSE, Halibrand cobra-3,and other brands of wheels. Along with Pin drive Accessories, Knock off spinners in 2 different ear angles, hub adapters and pin nuts. We also repair other brands of wheels that have been damaged and are no longer available. Thanks scott |
I have a set if your still looking?
|
| All times are GMT -7. The time now is 12:19 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: