|
Another helpful item
1 Attachment(s)
If you have a carburetor like I do and you occasionally need to remove the bowls you know how difficult it can be to catch the draining gas when you loosen one of the bottom bolts. There is very little room under the bowl on my car for anything but a rag to catch the gas. I just came across this little gem while watching a dyno session YouTube video where they were doing a jet change. It's made by Moroso. You don't need to buy it but it gives you a good idea how to make one just like it. About the only major modification would be the length of the spout.
Fred |
| All times are GMT -7. The time now is 06:49 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: