Club Cobra - Roll Bar Grommets

Club Cobra (http://www.clubcobra.com/forums/)

- ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)

- - Roll Bar Grommets (http://www.clubcobra.com/forums/all-cobra-talk/145248-roll-bar-grommets.html)

KenC	10-07-2021 08:23 AM

Roll Bar Grommets

Looking to replace the flat rubber gaskets that go around by roll bar under aluminum bezels. I need 2 inch ID round ones. Called a lot of folks and no luck. Anybody have a source? Might have to have some custom made.
.

HTM101

10-07-2021 03:17 PM

https://www.mcmaster.com/grommets/grommets-6/

https://www.delcity.net/store/1:4%22...08718.h_808708

https://www.rubberfeetwarehouse.com/...ts-2-1-2-holes

KenC	10-07-2021 05:18 PM

Thanks, problem is my outside diameter is 3-13/16.

Snake2998

10-08-2021 04:29 AM

I had Stainless Steel cover plates laser cut (in two halved so they are easy to remove) with large rubber O-Ring under it to seal the gap - looks OK.

KenC	10-08-2021 01:59 PM

I'm afraid that the paint might be scratched so i want rubber to cover whole area. I hope we all have learned our lesson on this pandemic and lack of manufacturing, etc.

John248

10-08-2021 09:50 PM

Might try Shell Valley. Their roll bars are 2 inch and they sell the grommets your looking for.

Snake2998

10-09-2021 04:29 AM

Quote:

Originally Posted by KenC (Post 1497907)

I'm afraid that the paint might be scratched so i want rubber to cover whole area. I hope we all have learned our lesson on this pandemic and lack of manufacturing, etc.

Wasn't worried about paint scratches as have a set of blank ones for whenever roll bar removed.

KenC	10-09-2021 05:46 AM

Shell Valley is out of them, said to call back in a month.

All times are GMT -7. The time now is 11:08 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: