|
Hardtop and Convertible Top For Sale
2 Attachment(s)
Hi all. I am selling my Ron Butler Hardtop. Ron made a small run of about 30 of these in the early to mid 80's. It is shaped like a convertible top with the bows and has a texture like a convertible top. The original rear glass was broken in a shipment way back when, but I had a plexi window cut to shape.
The top was molded to fit an original Cobra 427 body shape but of course can be trimmed to fit most Cobra replicas. I have all the hardware necessary to install the top. The price would be $1500 plus shipping(which could be $200 or more TBD). I also have a brand new Robbins convertible top in white with the bows and hardware to fit an original Cobra 427 and most replicas. The price would be $750 plus shipping TBD. I also have a pair of sliding window side curtains for sale but they need complete refurbishing. Contact me if you are interested. Cheers Greg |
Very cool peice!
Does it work if you have the pins in place for the soft top? |
Hi 1985 CCX. Which pins do you mean?
I would say yes #1: The 2 ferrels/sockets just behind the door where the convertible top bows fit in are also used to locate the hardtop. You would fit the hardtop first and then install the pins onto the inside of the hardtop to accurately locate the pins in the convertible top bow sockets. I was going to use a good old muscle car hood pin or a piece of ss or alum rod whose diameter matches the bow socket. If you mean the lift-a-dot fasteners along the back of the convertible top, I would say yes #2. Assuming you are using a fairly standard convertible top and not one too highly customized. The rear edge of the hardtop would be outside the line of lift-a-dot pins. The Ron Butler hardtop probably wouldn't work over roll bars. But you could always reconfigure/add height to the back lower edge of the hardtop to make it high enough. Cheers Greg |
Side curtain frames are SOLD.
Cheers Greg |
The buyer of my Cobra is not interested in the Butler Hardtop so it is still FOR SALE.
Cheers Greg |
| All times are GMT -7. The time now is 02:27 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: