Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Quick Jacks to Bumperetts (http://www.clubcobra.com/forums/all-cobra-talk/145522-quick-jacks-bumperetts.html)

Marc Wulf 01-03-2022 03:00 PM
Quick Jacks to Bumperetts
 
Hey All,
I have a Street Beast and decided to go from Quick Jacks to Bumperetts.
My question is. Will the mounting hardware for Quick Jacks accommodate
the Bumperetts and where can I get some? Thanks for any input and Happy New Year

novasscnc 01-03-2022 06:02 PM
I went the other way to quick jacks everything existing bolted up

PaulProe 01-03-2022 07:12 PM
The mounting edge/plate for quick jack is pretty much perpendicular to the frame of the vehicle. The mounting plate for the Over-Riders is angled and requires cutting the tubes/mounting studs to get them to mount properly.

Be prepared, depending on the source of the Over-Riders they may line up well but more than likely, it will be a very tedious job to get them to line up.

A tip for you. If you are only mounting the over-riders, it's not too bad a job, and being close with the angle will work. The angle of the plate should match the angle of the edges of the nose opening, top to bottom.

If you are going to mount the chrome nose hoop, be prepared for a real hassle. There are a bunch of angles that have to line up to get them to mount properly. It takes a lot of ADULT words and beverages to get it done

https://65shlb.com/wp-content/upload...9-1024x768.jpg

Daytona Dek 01-04-2022 03:48 PM
Quote:
Originally Posted by PaulProe (Post 1501793)
The mounting edge/plate for quick jack is pretty much perpendicular to the frame of the vehicle. The mounting plate for the Over-Riders is angled and requires cutting the tubes/mounting studs to get them to mount properly.

Be prepared, depending on the source of the Over-Riders they may line up well but more than likely, it will be a very tedious job to get them to line up.

A tip for you. If you are only mounting the over-riders, it's not too bad a job, and being close with the angle will work. The angle of the plate should match the angle of the edges of the nose opening, top to bottom.

If you are going to mount the chrome nose hoop, be prepared for a real hassle. There are a bunch of angles that have to line up to get them to mount properly. It takes a lot of ADULT words and beverages to get it done

https://65shlb.com/wp-content/upload...9-1024x768.jpg
Here in the U.K. the rubber finishers are very expensive from Cobra suppliers unless you modify something yourself. I notice yours are rectangular. Great colour combo btw. Like the “ghost” stripes.
Dek


All times are GMT -7. The time now is 08:59 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: