Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   4m x .7 x 4-5mm screw supplier (http://www.clubcobra.com/forums/all-cobra-talk/145885-4m-x-7-x-4-5mm-screw-supplier.html)

mrmustang 05-03-2022 02:15 PM
4m x .7 x 4-5mm screw supplier
 
Anyone have a supplier for 4m with .7 pitch, maybe 4-5mm screws for the convertible top to windscreen "C" brackets?

M4-0.7 X 5mm only



Thanks in advance


Bill S.

PS: I believe the above is the correct size, if not, please let me know.

spdbrake 05-03-2022 03:14 PM
Bill,

This is the 4mm length selection
https://www.mcmaster.com/browse-fast...m/length~4-mm/
and the 5 mm length
https://www.mcmaster.com/browse-fast...4/length~5-mm/

twobjshelbys 05-03-2022 03:27 PM
I don't know if you have one but for stuff like this I go to McFadden-Dale here in Vegas... Similar industrial hardware outlets are around...

mrmustang 05-03-2022 03:53 PM
Quote:
Originally Posted by spdbrake (Post 1506077)
I was at McMaster Car today, Grainger, Ace, Home Depo, and Lowes as well. The head diameters are too large, cannot be more than 6.0, almost must be oval or flathead, but counter sunk


Bill S.

spdbrake 05-03-2022 04:40 PM
Bill,

These should work. I've bought from Misumi before with no issues.

M4-.070 5mm overall length.
Head dia 6mm.
$.014 each

https://us.misumi-ec.com/vona2/detai...wysiwyg_area_0

Sargie 05-03-2022 08:34 PM
Bill,
Check out Fastenal. They have stores nationwide. You may need to cut length depending the screw style you need. We buy a lot of product from these guys for my business. They’re fast and reliable.

https://www.fastenal.com/product?query=M4-0.7&fsi=1

Rich

mrmustang 05-04-2022 05:14 AM
Quote:
Originally Posted by Sargie (Post 1506088)
Bill,
Check out Fastenal. They have stores nationwide. You may need to cut length depending the screw style you need. We buy a lot of product from these guys for my business. They’re fast and reliable.

https://www.fastenal.com/product?query=M4-0.7&fsi=1

Rich
I was there yesterday, they didn't have anything close, and wanted me to buy a box of stainless 10MM long units for $147.68 so I could cut down just 1. Thanks, but no thanks.

Bill S.

strictlypersonl 05-04-2022 05:37 AM
Generally we must manually trim the screws that we get with the windshield hardware. It's Jack's Special Talent.

mrmustang 05-04-2022 06:16 AM
Quote:
Originally Posted by strictlypersonl (Post 1506101)
Generally we must manually trim the screws that we get with the windshield hardware. It's Jack's Special Talent.
I'll take 4 please :)


Bill S.

sunman 05-04-2022 06:21 AM
HTTPS://hardwareincnola.com has massive inventory and will custom make hardware, bolts with custom grip length for example.
They have local stores we have one here in OKC I use.
They are aircraft industry suppliers along with lots of other product.
Maybe yes, maybe no, give it a try.

twobjshelbys 05-04-2022 11:46 AM
How about contacting someone that does the windshields? I'd call Gessford (their parts place)... They sell the windshield frames and have those screws. They may not have the length you want but can probably point you to the source.

mrmustang 05-04-2022 12:38 PM
Quote:
Originally Posted by twobjshelbys (Post 1506114)
How about contacting someone that does the windshields? I'd call Gessford (their parts place)... They sell the windshield frames and have those screws. They may not have the length you want but can probably point you to the source.
Found and ordered (10), will be here in the next few days.


Bill S.

twobjshelbys 05-04-2022 01:46 PM
Quote:
Originally Posted by mrmustang (Post 1506116)
Found and ordered (10), will be here in the next few days.


Bill S.
Where from?

mrmustang 05-04-2022 02:57 PM
Quote:
Originally Posted by twobjshelbys (Post 1506117)
Where from?
Post #5

I may, or may not have to deal with a coating on the head. Wire brush wheel on a drill will take care of that along with an overnight soak in Coke.


Bill S.

mrmustang 05-06-2022 01:54 PM
Quote:
Originally Posted by spdbrake (Post 1506081)
Bill,

These should work. I've bought from Misumi before with no issues.

M4-.070 5mm overall length.
Head dia 6mm.
$.014 each

https://us.misumi-ec.com/vona2/detai...wysiwyg_area_0
These worked perfectly, thanks again.

Bill S.

spdbrake 05-06-2022 02:13 PM
Great news Bill!


All times are GMT -7. The time now is 07:19 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: