Club Cobra
Page 2 of 3 1 2 3
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   This site is quieter than a high school reunion! (http://www.clubcobra.com/forums/all-cobra-talk/146221-site-quieter-than-high-school-reunion.html)

SwiftDB4 09-09-2022 07:32 PM
Quote:
Originally Posted by Blas (Post 1510265)
Car show at the old Meadowdale international Racetrack on Saturday. Always an interesting event. Big British Car Show on Sunday. Next week is the final Road America event.... that’s it for 2022.
Blas
Any of the old Monza wall left at Meadowdale?

Blas 09-09-2022 07:45 PM
Quote:
Originally Posted by SwiftDB4 (Post 1510271)
Any of the old Monza wall left at Meadowdale?
Long gone….

tonywyso 09-09-2022 11:09 PM
Quote:
Originally Posted by spdbrake (Post 1510255)
I'll be changing my drippy aft crank seal (one piece) on a 351W block here soon. Adding a Dual disc clutch and alum flywheel. My old alum flywheel is probably good but by time I change the steel friction plate, get it flat ground, get the clutch and flywheel balanced as an assy. It's cheaper to buy a match balanced clutch and flywheel kit. I'll post a shopping list once done.
How did you like the aluminum flywheel and what brand dual set up are you going with.

Snake2998 09-10-2022 04:14 AM
We see some beautiful and powerful engines on this forum but it after watching the David Vizard Performance YouTube channel it seems like we could get matching performance with better and more economically running engines for all sorts of reasons including poorly designed cams, badly matched and selected and ported heads and inlets etc etc.

One of my dreams would be to collaborate with David on an engine for my Cobra - alas it will never happen.

spdbrake 09-10-2022 06:13 AM
Quote:
Originally Posted by tonywyso (Post 1510278)
How did you like the aluminum flywheel and what brand dual set up are you going with.
I love the 14lb flywheel currently installed. Revs quick, and decels quick. I have accidently taken off in 3rd a couple of times so torque does not seem affected.

I changed from my solid roller 3000-8000rpm to a hyd roller 1500-6500 and it a lot more torquey. No more low rpm trailer hitching.

Was going to go with a McLeod https://www.summitracing.com/parts/mcl-6913-07 but their stuff never comes balanced.

So then put a Ram https://www.summitracing.com/parts/ram-50-2259 in the cart. But after looking at pricing for the flywheel insert, grinding and match balancing I'm going with a Ram https://www.summitracing.com/parts/ram-75-2259

My 408W is internally balanced but Ram does sell external balanced kits as well.

Standard throwout bearing, and fork. Adjustable pivot ball. I have a Lakewood bellhousing and external hyd slave setup.

Kthulu 09-10-2022 08:25 AM
Quote:
Originally Posted by nkb (Post 1510259)
Where in the States did your SPF land? They have been changing up their US distribution points.
Mine came in via Charleston, SC on September 2nd. My dealer drove down and brought it back up to Maryland along with another car from their order, a beautiful "British racing green" MKIII roadster. They have another two cars down there that were being picked up later.

We have every other component in shop now; wheels and tires (don't get me started on the scarcity of performance tires...), a brand new TKX transmission, you name it. Just been waiting for Roush to get back to us with build date...

cycleguy55 09-10-2022 02:09 PM
Quote:
Originally Posted by Blas (Post 1510217)
Hey, this site is quieter than a high school 50th reunion. Anyone doing anything interesting to their cars? Anyone thinking of doing anything to their cars? Finish any projects?
I’m doing another Wiring Diagram for the Grand Sport and working on a new project, some wheel-well vents near the headers.
Blas
My high school class just had it's 50 year reunion - it was anything but quiet. LOL

tonywyso 09-11-2022 08:31 PM
Quote:
Originally Posted by spdbrake (Post 1510283)
I love the 14lb flywheel currently installed. Revs quick, and decels quick. I have accidently taken off in 3rd a couple of times so torque does not seem affected.

I changed from my solid roller 3000-8000rpm to a hyd roller 1500-6500 and it a lot more torquey. No more low rpm trailer hitching.

Was going to go with a McLeod https://www.summitracing.com/parts/mcl-6913-07 but their stuff never comes balanced.

So then put a Ram https://www.summitracing.com/parts/ram-50-2259 in the cart. But after looking at pricing for the flywheel insert, grinding and match balancing I'm going with a Ram https://www.summitracing.com/parts/ram-75-2259

My 408W is internally balanced but Ram does sell external balanced kits as well.

Standard throwout bearing, and fork. Adjustable pivot ball. I have a Lakewood bellhousing and external hyd slave setup.
I'm looking at "Quick Time" they have light weight dual and triple setups. This will be my winter ptoject.

spdbrake 09-12-2022 08:01 AM
Quote:
Originally Posted by tonywyso (Post 1510366)
I'm looking at "Quick Time" they have light weight dual and triple setups. This will be my winter ptoject.
I think you may have meant Quartermaster. I had looked at their kits but all of their 2-3 disc except the Optimum SR are strapless floating plate typ = noisy and rattle.
The Optimum SR are not available in my config of 157tooth flywheel, Internally balanced, 26spline, and their price point is $3500-4300 puts them out of range compared the $1000 for the complete Ram kit

For my needs I'm just looking for the extra holding power of the 2 disc that still have room for a Fork and external slave, and the ease of operation in traffic.

Chicagowil 09-12-2022 09:15 AM
My painter came to the shop 2 weeks ago to review my CRI for paint. He would like to start on it in October and work on it into winter. Timing works for me since winter in Wisconsin is coming sooner than I wouldlike.

Wife and I decided to take a driving vacation to the west coast to see friends and family up and down the coast. Made it to SoCal end of last week. We have been visiting her childhood friend in Long Beach. They had a large car show in Belmont shores (1/2" walk from her house). We attended yesterday They close the main street from 10-4. A lot of cars. A couple of Cobra replicas. But one of the more impressive cars was a 66 Mustang GT350 with the Paxton S/C.

http://www.clubcobra.com/forums/pict...=20431&thumb=1
http://www.clubcobra.com/forums/pict...=20432&thumb=1

Alfa02 09-12-2022 11:21 AM
Brian, my 50th is next year, if I have anything to do with it, it will not be QUIET. Missed my 40th, but made the 35th, bought my XKE coupe. (Voted coolest car @ the Reunion) We had a small class (Less than 100) but most were cars guys. Lots of Mustangs, Z-28 or 2, 440 Roadrunner, and of course me in a 62 Dodge Dart 6cyl, 3-speed, but had ET mags, and glass pack ;) This coming year, they will hear me before they see me :) I wonder how many will show-up in their COBRAS?? Not many is my bet. My high school girlfriend thought the Jag was pretty cool (I was married then, not now) wondering what she will think of the Cobra, she was still very pretty, 15years later, here's hoping :) But, but the best one was our 20th, Drove in my full-on 240z race car, open exhaust, race tires, gutted int. full rollcage. Unloaded it a couple blocks away, my Wife practiced getting out the car with a dress on (Didn't go well ;)) She was a Trooper, I'll give her that. Did a donut or two, and PARTIED like it was 1999, in 1993 :) Good time Kids.

cycleguy55 09-12-2022 09:01 PM
Quote:
Originally Posted by Alfa02 (Post 1510386)
Brian, my 50th is next year, if I have anything to do with it, it will not be QUIET. Missed my 40th, but made the 35th, bought my XKE coupe. (Voted coolest car @ the Reunion) We had a small class (Less than 100) but most were cars guys. Lots of Mustangs, Z-28 or 2, 440 Roadrunner, and of course me in a 62 Dodge Dart 6cyl, 3-speed, but had ET mags, and glass pack ;) This coming year, they will hear me before they see me :) I wonder how many will show-up in their COBRAS?? Not many is my bet. My high school girlfriend thought the Jag was pretty cool (I was married then, not now) wondering what she will think of the Cobra, she was still very pretty, 15years later, here's hoping :) But, but the best one was our 20th, Drove in my full-on 240z race car, open exhaust, race tires, gutted int. full rollcage. Unloaded it a couple blocks away, my Wife practiced getting out the car with a dress on (Didn't go well ;)) She was a Trooper, I'll give her that. Did a donut or two, and PARTIED like it was 1999, in 1993 :) Good time Kids.
We had nearly 400 in my graduating class. Percentage-wise, we had more teachers from 1972 show up then students. Bizarre.

I showed up for the school tour in the Cobra. Fashionably late, in fact - which unintentionally worked out quite well.

The assembled throng was in front of the school, waiting for the tour to start, when I rolled up alongside them, blipped the throttle and backed into a parking stall and climbed out. Got a few chins wagging over that entrance.

Blas 09-12-2022 09:55 PM
Our 50th is this weekend, we are celebrating 2 years later due to Covid. I was on the event planning committee. (I supplied music) We limited the attendees to 100 and barely got that.i realized that it’s the same weekend as the last Road America event... so I’ll be at the track!
Great to see some replies to this thread. Anyone with winter upgrades in the planning stage?
Blas

2020 GT500 CFTP 09-13-2022 12:20 AM
Working on my hi tech build. I built the 428 a couple weeks ago. Engine/trans driveline and loop installed. Brakes and Brake plumbing and suspension almost done. Oil cooler lines next and then I will put the body back on to make the aluminum pieces.

Malgyver 09-13-2022 02:27 AM
I started my build thread, over on the Hurricane site. I'll copy and paste it to the build forum here.

https://forum.hurricane-motorsports....p?topic=2699.0

xb-60 09-13-2022 06:08 AM
Quote:
Originally Posted by Blas (Post 1510416)
Our 50th is this weekend, we are celebrating 2 years later due to Covid. I was on the event planning committee. (I supplied music) We limited the attendees to 100 and barely got that.i realized that it’s the same weekend as the last Road America event... so I’ll be at the track!
Great to see some replies to this thread. Anyone with winter upgrades in the planning stage?
Blas
Before I comment, umm....."our 50th" what?

Blas 09-13-2022 06:26 AM
Ahh…. “Reunion”

Chicagowil 09-13-2022 09:48 AM
Quote:
Originally Posted by Blas (Post 1510436)
Ahh…. “Reunion”
"Reunion?" Does that mean you all went to one of them there fancy High Schools?

I got kicked out for eatten the pages from the books and pulling on the girl's pig tails!:)

Alfa02 09-13-2022 01:35 PM
WOW 50years !!
 
Quote:
Originally Posted by xb-60 (Post 1510433)
Before I comment, umm....."our 50th" what?
High School, you do remember that Right, Glen, something you did in 40's :LOL: I have a hard time remembering anything about the late 60's/early70's, just a "Hazy memory" :JEKYLHYDE

xb-60 09-13-2022 11:44 PM
Quote:
Originally Posted by Alfa02 (Post 1510456)
High School, you do remember that Right, Glen, something you did in 40's :LOL: I have a hard time remembering anything about the late 60's/early70's, just a "Hazy memory" :JEKYLHYDE
High school...? :confused:
Tom, you're confusing me with someone else :rolleyes:


All times are GMT -7. The time now is 09:48 PM.
Page 2 of 3 1 2 3
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: