|
New build issue - Smiths reverse speedo reads 20mph regardless of speed
Here's my latest new build issue. I have Smiths gauges in my car. My speedo is the reverse sweep version. When I start driving it'll increase speed indication up until about 20 MPH, but won't go any higher. I don't notice any odd speedo or cable noises, but then again the car is pretty loud and I don't know if I'd even hear the noise if it was there. Have any of you got any experience with something like this or any ideas? It's a TKO600 trans if that matters at all. Thanks.
|
Follow this thread and first test it with your power drill.
http://www.clubcobra.com/forums/all-...le-bounce.html |
| All times are GMT -7. The time now is 08:47 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: