|
Solid mounted diff LCA support
Hi,
In UK. I have a solid mounted diff and jag xjs suspension In board discs. As I have gone turbo I need to support the LCA more. Due to the design of the chassis, LCA bolt goes through chassis in a tube support, I can't get a rose joint etc inline with the LCA pivot to go to the LCA original radius mount. My only option ? Is to do a watts link forward and aft of the LCA arm radius bush mount or top of the hub design. Do both of these allow the movement up and down of the IRS? Regards Gav |
Make brackets on the bottom of the lower control arm and the top of the hub carrier. Use these to control movement.
https://www.maximummotorsports.com/Q...1494-P971.aspx |
Hi,
Thanks for reply but no idea what that means sorry? Regards Gav |
Here is what I did. I have the 55" rear..2.88, lsd centre.
https://redirect.viglink.com/?format...26amp%3Bs%3D19 |
Here is what I did. I have the 55" rear..2.88, lsd centre.
https://twitter.com/JohnMaddison2/st...VMf65kLzdrKPwA |
Hi,
Thanks for response Is that inline with the diff inner LCA? If not as from the picture does it bind through travel? Regards Gav |
This uses a lower trailing arm, but a second torque damper could be used there too.
http://erareplicas.com/temp/watts_jag.jpg |
Quote:
|
|
| All times are GMT -7. The time now is 03:34 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: