Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Cobra 427sc remote oil filter (http://www.clubcobra.com/forums/all-cobra-talk/146698-cobra-427sc-remote-oil-filter.html)

Stephan289fia 03-05-2023 09:14 AM
Cobra 427sc remote oil filter
 
Hi guys, can anyone tell me the thread sizes for the adapters to 10an for the oil lines ? Thanks, Stephan

Stephan289fia 03-05-2023 09:17 AM
FE engines

HTM101 03-05-2023 09:33 AM
https://www.titanfittings.com/Articles.asp?ID=412

https://www.anplumbing.com/straight-npt-to-a-n.html

BDR_Devin 03-07-2023 05:55 AM
Good Morning, here at Backdraft Parts we offer a remote oil filter kit. The kit is designed for a SBF, we use the 351W blocks. The remote mount piece will work with whichever relocation you choose if ours doesn't fit your application. Please give us a call @ 5614895193 and We'll be glad to help you figure it out.

Cory

eschaider 03-07-2023 07:44 AM
Stephan,

If you are using AN hardware, they have made it easy for you. AN X fittings, where "X" is the AN size you are using, will be compatible with and fit any AN fitting with the same "X" descriptor. It eliminates mismatches and leaks.

If you are assembling other than AN fittings to AN hardware it is not recommended because the AN fittings use an angular sealing surface to create the seal at the fitting(s). You will find there are JIC fittings that look like AN fittings. They are not interchangeable.

Both use an angular sealing surface methodology however, one uses a 37˚angle and one uses a 45˚angle. AN fittings are typically aluminum or steel and JIC fittings are frequently brass. Stick to major retailers like Jegs and Summit for your plumbing hardware and you will be OK.

RockBit 03-07-2023 07:47 AM
Quote:
Originally Posted by Stephan289fia (Post 1515258)
Hi guys, can anyone tell me the thread sizes for the adapters to 10an for the oil lines ? Thanks, Stephan
Measure the thread diameter into your adapter in inches and subtract .300 from your measurement. Round to the nearest of 1/4, 3/8, or 1/2. That will be the NPT size.


All times are GMT -7. The time now is 03:44 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: