Club Cobra
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Stallion Help (http://www.clubcobra.com/forums/all-cobra-talk/14949-stallion-help.html)

Back in Black 07-06-2003 10:47 PM
Here's the problem on my West coast...
 
The fuel filler neck (hole in the fiberglass body) is too small diameter to install real fuel grade line. Mine was delivered from West Coast with a piece of LOOSE radiator hose with NO hose clamps installed on the LeMans cap or the tank neck. Therefore, when full the tank leaked into the trunk, where I have a 600 watt stereo amp, etc.... :mad:

Good thing I noticed the FUEL leak and installed a new piece of RADIATOR hose there. Why did I use radiator hose??? Because the hole in the fiberglass body was too small for the CORRECT fuel grade line. No way to safely open up the hole with power tools. It's right over the FUEL FILLER NECK :mad:

I will be BUYING a new aluminum fuel cell soon, with a smaller fuel filler neck as a result..... It's OK, I budgeted for it in my final price for the car. Check to see what the H*#$ was used in between your LeMans cap and the tank neck...!!!!

On the positive side, I have repaired most of the factory "boo boos" and my babe and I attended the Seattle international raceway's Vintage races today in my machine, it was a blast ! :MECOOL:

sidepipe49 01-11-2009 05:55 AM
Quote:
Originally Posted by Mohuska (Post 120176)
Back in Black and I are trying to get all West Coast and Stallion owners together to share info and get together......please see thread Attention all West Coast Cobra and Stallion Owners........sign in and leave your e-mail addresses....Thanks......
I am a stallion owner, sidepipe49@yahoo.com Please put me in the information loop.

SoTxButler 01-11-2009 12:19 PM
Check out the "looking for Steve Arntz" thread currently in the Arntz/Butler forum. Bob Bennett is posting and he worked for Steve. Lots of info in this thread.

HI Cobra 01-11-2009 01:06 PM
Sidepipe49,
Please note that the thread you responded to was posted in July 2003.
I'd be looking at the "Steve Arntz" thread which is current.

sidepipe49 01-11-2009 08:22 PM
stallion
 
I talked to everett morission in Houston tx. he said he could make a top for the stallion or west coast cobras. he is supposed to send me all the specs. So anyone else needing a top, maybe this guy will work


All times are GMT -7. The time now is 06:30 AM.
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: