|
Quick question...
If my trailer's clearance loading the Cobra into it is a bit low, will a 2" x 12" x 8' plank support it's weight and allow it to clear without scraping ?
|
I assume you are talking about getting your oil pan or bell housing over your ramp when you are loading your car.
If so there are a couple of things you can do. 1) Jack your trailer up higher in the front to reduce your loading angle. 2) Add an extension to your ramp. I used a piece of 3/4" exterior grade plywood 18" Wide by 8' long. I attached it to my loading ramp with a piano hindge and used four two by fours (2x4) about 15" long cut into a wedge to support the tires as they are rolling up on the ramp. No problems holding the weight of the Cobra but it does make the ramp a little heavier to lift. When it warms up I will play with the tension on my spring that helps lift the ramp. I hope this is what you are refering in your post. Good luck! Clois |
| All times are GMT -7. The time now is 08:21 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: