|
any ideas for adding windows to my new cobra?
My new car has no windows. What are my options for winter for the hard top?
|
I too, have a hard top and no side curtains, so I've made templates of foamcore [better than cardboard] traced to the exact fit, and notched close around the wind wing hardware.
From these templates, I will subtract 80% of the thickness of a foam filled rubber bulb moulding that has a pinch channel attached. Cut the windows from 1/4 " lexan, sand the edges nicely, attach the pinch moulding to it and work out a simple latch @ the opening edge of the door. If done properly, the windwing hardware will hold the leading edge of the window. and the moulding will not scratch the paint, yet give a snug seal. I am, however expecting to have to enter the car, then insert the window, which is less than convenient, but will do in a pinch when really needed. Good luck! |
|
cobra windows
thank you. still tryin to find all the helpful sites, getting my car Monday. going to drive it without windows even if it is Feb in Midwest. Lana
|
Lana,
Talk to Bryan about these window frames because I don't think they will fit. When Bryan and Barry were designing the hard top (I have the first one made) they were trying some window frame hardware and it didn't work. Main problem was the contour of the door to front window frame. As I recall the base of the frame would not follow the center line of the top of the door. I have been experimenting with Gull Wing type windows but have not found a configuration I can live with yet. Good luck and keep us informed with your windows. Clois Harlan-Tulsa |
| All times are GMT -7. The time now is 08:36 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: