|
TP Intake pics
Had the intake off the other day. So I thought I'd post some pics.
Replaced a failed head gasket and one bad valve. Also am modifying the sidepipes (went to 3" collector and racing mufflers). Jet-hot coated the headers and sidepipes (polished aluminum finish). Mostly back together--changing the pushrods and raising the rocker-arm shaft up a slight bit. Should be ready by next week. The change to slightly longer pushrods and raising the rocker shaft is to correct what looks to be a geometry problem. Pushrods were rubbing the tunnels more than you would like and it looks like the rocker arm was contacting the shaft at too much of an angle (the whole assembly looks like it was at a slight wrong angle). http://12.147.6.93/yabbse/tp-front-3.jpg http://12.147.6.93/yabbse/tp-rear-3.jpg |
dang purty Bill, I just purchased the stelling/ helling cleaners for my new medium riser and they came with two different filters (green ,and a very porus brown) what are you using ?
thanks Karl |
I had the green and changed to the darker ones. They looked more porous, so I suppose they did flow a little better.
I am fabricating a a quasi cold-air pan that will seal against the top of the hood scoop and have changed to K&N's that flow through the top also. |
Now you tell me! I just paid $150 for a pair , I knew I should have asked the membership to see if any one was holding extras, Oh well I guess im not doing any of this to save money.........
|
| All times are GMT -7. The time now is 04:41 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: