|
Nice Little Wrenches
Just picked up these ratchets from
www.azmotorsports.com Small and good for tight places and sparkplugs. http://www.priveye.com/dls/ratchet.jpg Roscoe |
Wrenches! I thought you said wenches!
|
Their little hydraulic brake bleeder tool is a real time-saver, too. I had a plastic version which I purchased several years ago, which I found recently had sprung a leak. I picked up one from these folks and found it's a much better design. For one thing, it's metal so should last longer. For another, it's got a spring-loaded check valve, so that you have to build up a small amount of pressure before it will open the valve and allow fluid passage. It then shuts very quickly when you release pressure. Assuming you have a relatively good seal around the bleeder valve threads, this little jobber makes brake bleeding a true one-man job. Tool is about $17.
http://store1.yimg.com/I/azmotorsports_1728_2768171 |
Hey Chopper......
Where'd ya get that thingy from? Looks like it would be very handy to have around so I can quite bugging my wife!!!
WOW - no need to have her in the shop anymore!!!!! :LOL: David **) |
Dave,
check my link above on my original post. Roscoe |
Hey Roscoe....
Thanks.....
DOH!!!!! Missed that pivotal first word in his post.....:JEKYLHYDE David:LOL: |
Roscoe, I could not find those ratchets
under tools?, wanna help me out here.... |
Perry,
Yeah, call them and Ask for Stace Wolfe. The model numbers are MP08-0231 for the 1/4" MP08-0226 for the 3/8" They are 27.85 each You can reference my order # of 54087 dated 3/11 Roscoe |
|
Jeff, if I wanted a regular ratchet I'd go to my tool box?
|
I didn't know "regular" ratchets were only 3" long. I guess my ratchets are the extra long version.
|
my wife asks why!
Why do I spend so much time on Club Cobra? she'll ask!
Because there is NOT one thread that I can't learn from...or at least get a chuckle! She knows, as I've learned here, that with a shorter stroke you can get more RPMs! That is a neat 3" tool! T |
My girlfriend says she likes playing with my 3 inch tool! (I gotta keep her out of my garage!!!)
|
Dang.....
I just wish I had a 3" tool....:JEKYLHYDE :3DSMILE: :3DSMILE:
David:LOL: |
| All times are GMT -7. The time now is 11:26 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: