| leadfoot |
04-07-2003 09:16 PM |
Johnex owners.. What wheel offsets do you use?
I am looking at the PS wheels and would like to confirm the required wheels offsets before order and shipping over the boarder...
|
| bmercer |
04-08-2003 05:56 AM |
1 Attachment(s)
Leadfoot
My car has 3 3/4" backspace front and rear, with 7" fronts and 8" rears. I was limited on the rear for width because I used a full width Lincoln Verssailles diff which is about 4" wider than the ones John used. If you have the narrowed diff, 10" should work with the 3 3/4" or 4" backspace.
|
| leadfoot |
04-08-2003 04:47 PM |
I am not sure what the 9" Ford rear end came from..., so I don't know if it has been shortened. Does anyone have info on how to measure the offset?
|
| All times are GMT -7. The time now is 04:45 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
