Club Cobra
Page 2 of 3 1 2 3
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   CSX 4027 Should be an Icon for SAI POll (http://www.clubcobra.com/forums/all-cobra-talk/40416-csx-4027-should-icon-sai-poll.html)

Bill Kesner 04-11-2003 12:22 AM
Steve........

That's pretty much the same story I heard, as my car was built by Shelby in 1999. The aluminum bodies were possible, though for a big price at the time. I also feel very fortunate to have a 100% Shelby roller, as I understand that is no longer the case. Don't tell Evan though. We'll give him grief on another thread. :3DSMILE:

- Bill -

CSX 4039 04-11-2003 07:53 AM
Re: Fried
 
Quote:
Originally posted by CSX 4027


I believe there was only one car with an earlier serial number that got an aluminum body. It was from Kimmons I believe. I heard it cost a ton [/b]
Sunshine Kid- It did. I have the itemized leger. If you would like to know more about it, give me a holler.:)

CSX 4027 04-11-2003 08:03 AM
Brett
 
Do you have the bill for the aluminum car that pre-dates 4027?
I would love to see it posted.
Is yours aluminum? If so, Is it Kirkham, Kimmons, Kemper or Leahey?
By the initials of the first 3 aluminum suppliers, please don't anyone assume there is a connection to the guys that seem to have a lot of meetings.:LOL:

ST 04-11-2003 08:05 AM
If I'm not mistaken, this company was used for some earlier cars.

http://www.panel-craft.com/profile.html

CSX 4039 04-11-2003 08:10 AM
Re: Brett
 
Quote:
Originally posted by CSX 4027


Do you have the bill for the aluminum car that pre-dates 4027?--NO
I would love to see it posted.
Is yours aluminum? -YES. If so, Is it Kirkham, Kimmons, Kemper or Leahey?- KIMMINS
By the initials of the first 3 aluminum suppliers, please don't anyone assume there is a connection to the guys that seem to have a lot of meetings.:LOL: CALL 'EM SPECIAL KKK!!

CSX 4027 04-11-2003 08:17 AM
ST
 
Panel Craft was the company contracted only be HRE to build aluminum cars based off a buck made from the glass 4000 shell.

CSX 4027 04-11-2003 08:18 AM
Brett
 
Kimmins is the right answer. In my opinion, they make the best.

CSX 4039 04-11-2003 08:38 AM
Re: Brett
 
Quote:
Originally posted by CSX 4027


Kimmins is the right answer. In my opinion, they make the best.
I like it, too. I can't take credit for it, as I am the third owner. It was a ballsy move for the original owner to sink that much into one. He took a bath when he sold it. ( I hope he enjoyed it)! The second owner took a lesser shower, as I probably would right now, if I sold it. From what I hear, it is more a continuation car with a 4000 serial number- a new style Shelby frame with a original style unaligned aluminum body- warts and all. I sure would like to have a brake upgrade, though! (Can you say "run away horses"!!) I have heard that a Kimmins continuation car was used to splash the mold for the fiberglass 4000 cars. Is this true, can you confirm or rebutt that? Just curious. :confused: If I did want to get different brakes, what would you recommend, and how much $??

CSX 4027 04-11-2003 09:03 AM
Before you get a brake upgrade
 
I raced on the original brakes and had no problem. For the street I suggest you get a new set of original rotors. Have them gas slotted only. Not cross drilled. Then have the cryogenically treated.
Then get a set of pads from Porterfield 800-537-6842. Your pads are too hard and need to be softer.

computerworks 04-11-2003 09:04 AM
4039 post-dates 4027 by s/n

my records show that CSX3178 was used as the splash for the CSX4000 'glas cars

CSX 4027 04-11-2003 09:11 AM
Brett
 
Would you publish how much the original owner had in your car? You don't have to tell us what you paid if you don't want.
Just curious what a Kimmins project really cost the end user.

snakeeyes 04-11-2003 09:13 AM
Steve, where did you get that original Stant radiator cap?:3DSMILE:

CSX 4027 04-11-2003 09:30 AM
Snakeeyes
 
The car has the crappy original cap.
I only used it if I had to show the car.
Those caps are too light for a real race motor and boil it over too easy.
A higher pressure cap like the Racing Stant 19-21 brings up the boiling point which is aht you want.

CSX 4027 04-11-2003 09:34 AM
Snakeeyes
 
PS The car also came with the following....
Original Oil breather cap- another item that is useless
Original LeMans 780 Carb-Useless
Original Transistorized Distributor, Amplifyer and wiring - useless
and a host of other show quality 1965 original INTERCHANGABLE items that were prettier than functional.

CSX 4039 04-11-2003 09:41 AM
Quote:
Originally posted by computerworks


4039 post-dates 4027 by s/n

my records show that CSX3178 was used as the splash for the CSX4000 'glas cars

I know that 4039 was not the mold, as glass cars pre-dated it. But Sp K told me once that it was a Kimmins continuation car that was used as the mold. Just wondering. I guess that fits the discription as 3178 is a continuation car, no? Was 3178 body by Kimmins, or, Body by Fisher? :)

CSX 4027 04-11-2003 09:53 AM
Mold
 
I was told McClusky or Kimmins had something to do with the mold.

CSX 4039 04-11-2003 09:54 AM
Re: Brett
 
Quote:
Originally posted by CSX 4027


Would you publish how much the original owner had in your car? You don't have to tell us what you paid if you don't want.
Just curious what a Kimmins project really cost the end user.
Sure, why not...$119,367.94 in 1998. All finish out authentic correct stuff. A clone of 3056 except for dual 715 cfm Holleys instead of turkey pan.
http://www.clubcobra.com/photopost/s...t=1&thecat=500

computerworks 04-11-2003 09:58 AM
Quote:
Originally posted by Brett J. Bolte


. I guess that fits the discription as 3178 is a continuation car, no? Was 3178 body by Kimmins, or, Body by Fisher? :)
CSX3178 was a real original street car....body by AC

Bud Man 04-11-2003 10:00 AM
Brett:

Late to this, but was your car offered for sale for a while at House Of Cobras in Orange, California?

Bud:JEKYLHYDE

CSX 4039 04-11-2003 10:48 AM
Quote:
Originally posted by Bud Man


Brett:

Late to this, but was your car offered for sale for a while at House Of Cobras in Orange, California?

Bud:JEKYLHYDE

yes, before I bought it.


All times are GMT -7. The time now is 11:39 AM.
Page 2 of 3 1 2 3
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: