Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Engine Misses At Low Rpm's (http://www.clubcobra.com/forums/all-cobra-talk/40530-engine-misses-low-rpms.html)

clayadkins 04-13-2003 08:00 PM

Engine Misses At Low Rpm's
 
JUST OUT OF THE BLUE MY CAR STARTED MISSING AT LOW RPMS. IT ESPECIALLY LIKES 2ND AND 3RD GEAR RUNNING ABOUT 1600-1800 RPMS. I REPLACED THE PLUGS AND WIRES AND IT DID NOTHING. THE MOTOR IS A SMALL BLOCK 302 EFI. DOES ANYONE HAVE ANY SUGGESTIONS.

Excaliber 04-13-2003 09:16 PM

Check all your vacuum lines. Sounds like a leak, leaning it out. Also check all the sensor plug in connections, espicailly the O2 sensor plug in connector.

Ernie


All times are GMT -7. The time now is 04:14 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: